Full Body Harner Safety Murah

Full Body harness Haidar safety ,safety harness,Fall protection,Harness system,Full body harness,Safety gear,Climbing harness,Construction harness,Rescue harness,Occupational safety,Work at height,Personal protective equipment (PPE),Harness inspection,ANSI standards,OSHA regulations,Suspension trauma,D-ring attachment,Buckle closure,Adjustable straps,Fall arrest
Positioning lanyard,Shock absorbing lanyard,Construction industry,Roof work,Confined space,Tower climbing,Industrial safety,High-angle rescue,Risk assessment,Compliance training,Competent person,Anchorage pointm,Load capacity,Webbing material,Rescue plan,Safety awareness,Ergonomics,Weight distribution,Comfort padding,Welding harness,Electrician harness
Tower maintenance,Hazard identification,Emergency evacuation,Fall restraint,Work positioning,Inspection checklist,Harness fit,ANSI Z359,NFPA 1983,Suspension trauma straps,Rescue equipment,Harness donning,Rescue training,Fall protection program,Personal fall limit,Fall hazard,Construction site safety,Hazard mitigation,Fall clearance,Fall distance,Retractable lanyard,Fall prevention,Harness sizing,Roofing safety,Fall protection hierarchy,Self-retracting lifeline,Harness storage,Harness lifespan
Work platform,Aerial work platform,Fall arrest system,Construction worker safety,Rigging harness,Tower safety,Emergency response,Elevated work platform,Scaffolding safety,Hazard communication,Welding safety,Ladder safety,Forklift safety,Crane safety,Construction supervisor,Industrial rope access,ANSI A10.32,Safety training,Occupational Health and Safety (OHS)
Harness certification,Fall protection anchor,Safety harness inspection checklist,Emergency rescue plan,High visibility harness,Tower climbing certification,Fall protection training,Fall protection anchor point,Emergency evacuation plan,Construction fall hazards,Safety at elevation,Harness maintenance

Sfesifikasi Produk Bright Safety Full Body Harness:

Certificate : EN361:2002, EN358:2018, EN813:2008

We declare that this product is manufactured in conformity with the provisions of council directive 89/686/EEC and with the harmonized standard EN 361:2002 the minimum breaking strength of the webbing is 22KN

Vitting intrucion

1. Locate the rear triangle
2. Fit harness over shoulders
3. Couple buckles
4. Fit leg straps left stap to left bucle right strap to right buckle do not cross
5. Tidy surplus webbing ny sliding blue slide to end of loose webbing
6. When standing straight the harness shuld be comportable without undue pressure on chest shoulders on pelvic area

That harness theat it made of polyester is designed to be used for working at a height where the provision of general building construction site, works on roofs suitable barriers or other similar safeguard is impracticable

You can put on the harness in following other :

1. Take the harness by the dorsal D-ring attacted to the plastic plate, Make sure to use only D-ring for fall arrest purpose
2. Slip on the shoulders straps one after the other taking care not to twist them
3. Adjust one end then the other shoulder stay bu pulling or releasing the slack end, so that the buttock stap is firmly in place under the buttocks
4.  Pull one and then the other thigh the crotch and latch each stap and each of the female buckles locared at the thighs, by passing the male bucle through the female, make sure not to cross the straps.
5. Adjust the tension of thigh straps by pulling and releasing the slack and of the strap, Pastening and/or adjustment element must be regularly checked during use
6. Attach the chest strap and adiust its tension to hold the shoulders straps centered on each shoulders